KROHNE SU 600 Ex EN - Manual (Page 10)

105
80
ø 4,5*
1
2
Fig. 3: Wall mounting
1 Metal strap
2 Covering slide switch active-passive
1 Remove the pluggable terminal strips from the top and
bottom.
2 Screw pin [3] into the rear of SU 600 Ex and tighten with a
screwdriver.
3 Insert SU 600 Ex from the front into the front panel [1].
4 Place the clamping strap [2] from the back over the pin [3]
and pull it with the knurled nut [4] against the panel [1].
~90
92
1
3 2 4
Fig. 4: Panel mounting
1 Front panel
2 Terminal strap
3 Pin
4 Knurled nut
Panel mounting
10 SU 600 Ex - 4 ... 20 mA signal conditioning
Mounting
30653
-EN
-050803