KROHNE OPTISENS PH 8100 EN - Manual (Page 23)

OPERATION
4
23
OPTISENS PH 8100
www.krohne.com 03/2012 - 4001925901 MA OPTISENS PH 8100 R01 en
Operation
4.1 Menu mode structure
INFORMATION!
The following table just presents an overview. When programming the device, always consult the
function tables additionally as they contain further information!
Only the sensor relevant menus are shown in the following tables. For detailed information
about the general setting refer to the MAC 100 signal converter manual.
Measuring
mode Main menu Submenu Parameter
3 or 4
pages,
scrolling
with ↓ or ↑
> 2.5
s
^
A A A A
quick quick quick quick
setup setup setup setup
>
^
A9.1 temp.comp. >
^
A9 pH cal. A
process input A pH calibration
(for dual channel version; refer
to pH/ORP sensor
documentation for further
information)
>
^
For further
information
see function
tables.
A12.1 start calib. ORP A12 ORP calibration B
Only if switched to ORP! Only if switched to ORP! Only if switched to ORP! Only if switched to ORP!
process input B ORP calibration
(for dual channel version; refer
to pH/ORP sensor
documentation for further
information)
A13.1 temp.comp. A13 pH cal. B
process input B pH calibration
(for dual channel version; refer
to pH/ORP sensor
documentation for further
information)
.book Page 23 Wednesday, July 4, 2012 11:07 AM