KROHNE BM 26 BASIC-ADVANCED ATEX EN - Manual (Page 27)

SERVICE
5
27
BM 26 BASIC/ADVANCED
www.krohne.com 12/2011 - 4000347102 - AD ATEX BM 26 Bas-Adv R02 en
5.1 Periodic maintenance
No maintenance is necessary.
5.2 Keep the device clean
5.3 Returning the device to the manufacturer
5.3.1 General information
This device has been carefully manufactured and tested. If installed and operated in accordance
with these operating instructions, it will rarely present any problems.
DANGER!
If you rub the anti-freeze cover option with a dry cloth, there is a risk of electrostatic discharge.
Clean the anti-freeze cover option only with a damp cloth.
CAUTION!
Should you nevertheless need to return a device for inspection or repair, please pay strict
attention to the following points:
• Due to statutory regulations on environmental protection and safeguarding the health and
safety of our personnel, manufacturer may only handle, test and repair returned devices that
have been in contact with products without risk to personnel and environment.
• This means that the manufacturer can only service this device if it is accompanied by the
following certificate (see next section) confirming that the device is safe to handle.
CAUTION!
If the device has been operated with toxic, caustic, flammable or water-endangering products,
you are kindly requested:
• to check and ensure, if necessary by rinsing or neutralizing, that all cavities are free from
such dangerous substances,
• to enclose a certificate with the device confirming that is safe to handle and stating the
product used.