ADT Security Services Focus 200 Plus - Manual (Page 3)

– 3 –
System Overview
Introduction
The ADT FOCUS
 200 PLUS is a user-friendly security system that
monitors your site’s detectors and alarms. Fully programmable, the
FOCUS
 200 PLUS allows you to control hundreds of critical security
functions from one menu-driven interface as simple to use as the automated
teller machine (ATM) at your local bank.
The ADT FOCUS
 200 PLUS consists of a central control unit, an operating
panel, and up to 255 protection points. The control unit is protected by a
heavy-gauge steel cabinet and protected by a tamper sensor. While
monitoring protection points 24 hours a day, the controller itself is
electronically monitored by trained ADT personnel. If a hazard or security
breach occurs, the appropriate authorities (police, fire) are alerted. In case of
a maintenance problem, ADT service personnel can also be notified.
All functions are accessed through the system operating panels or through
card/key readers.
FOCUS
    200 PLUS Features
• Attractive, easy-to-use, menu-driven operating panel.
• Up to 255 protection points in as many as eight independent groups from
one central location.
• Manual activation or deactivation of any function.
• Ability to turn group(s) on in either the AWAY or STAY mode. STAY
mode automatically bypasses certain point types. Check with your ADT
service technician to see if your system contains any of these point types.
• Ability to bypass points for maintenance or service.
• Ability to program automatic activation/deactivation of security groups.