ADT Security Services Focus 200 Plus - Manual (Page 13)

– 13 –
Quick Start (cont’d)
Responding to Alarms
During an alarm, your system’s alarm annunciating devices (bell, siren,
lights, and/or operating panel, depending on the optional devices you
selected) will be activated. The operating panel and horns will sound an
intermittent tone (with a 5-second pause every 10 seconds) to audibly
annunciate a fire alarm and a steady tone to audibly annunciate a burglary
alarm.
BURGLARY NOTE: Do not enter the premises until police arrive. Have a
key available to let the police in.
FIRE NOTE: If you are on the premises when an alarm occurs,
EVACUATE IMMEDIATELY.
HOLDUP NOTE: During a holdup or hostage (duress) situation, try to
remain as calm as possible. All employees should be
instructed on the operation of holdup devices. Users
with ID codes should be instructed on the use of the
Ambush/Hostage and Duress features.
Viewing Current Alarms
During an alarm (excluding holdup, hostage and duress alarms), the
operating panel will display the current alarm by type and point description.
? 1 Fire Alarm
Smoke Detector
No Other Alarms
Continue