KROHNE H250 M9 ES EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
H250
www.krohne.com 09/2012 - 4002294201 MA H250 KINAX R01 en
Safety instructions
1.1 Intended use
The variable area flowmeters are suitable for measuring gases, vapours and liquids.
The devices are particularly suitable for the measurement of:
• Water
• Hydrocarbons
• Corrosion protection agents and lubricants
• Chemicals and additives
• Solvents
• Superheated steam
• Food, beverages and tobacco
• Air
• Industrial gases
1.2 Certifications
The device fulfils all applicable statutory requirements of the following EC directives:
• Pressure equipment directive 97/23/EC
• For devices with electrical installations: EMC Directive 2004/108/EC
• Devices for use in hazardous areas: ATEX Directive 94/9/EC
as well as
• NAMUR recommendations NE 21 and NE 43
The manufacturer certifies successful testing of the product by applying the CE mark.
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
WARNING!
The operator himself bears the sole responsibility for the intended use of the device regarding
the suitability and the corrosion resistance of the used materials against the measured fluid. The
manufacturer is not liable for any damage resulting from improper use or use for other than the
intended purpose. Do not use any abrasive media containing solid particles or highly viscous
media.
CE marking
MA_H250_Sonder_Kinax_R01_en_4002294201_PRT.book Page 5 Monday, September 17, 2012 11:13 AM