KROHNE H250 M9 ES EN - Manual (Page 17)

ELECTRICAL CONNECTIONS
4
17
H250
www.krohne.com 09/2012 - 4002294201 MA H250 KINAX R01 en
4.2 Connection of current output 3W2
Power supply 3W2 with galvanic isolation
Wiring must be planned with great care when it comes to connecting other devices such as
evaluation units or process control. Internal connections in these devices (e.g. GND with PE,
mass loops) may lead to non-permitted voltage potentials which could negatively affect the
function of the converter itself or that of a device connected to it. In such cases a protected extra-
low voltage (PELV) is recommended.
Current output terminal connection
1 Power supply 12...30 VDC
2 External load
3 Terminal connection
4 3W2 angular position transmitter
Current output terminal connection with galvanic isolation
1 Power supply (refer to supply isolator information)
2 External load
3 Converter supply isolator with galvanic isolation
4 Terminal connection
5 3W2 angular position transmitter
MA_H250_Sonder_Kinax_R01_en_4002294201_PRT.book Page 17 Monday, September 17, 2012 11:13 AM