KROHNE H250 M9 ES EN - Manual (Page 15)

INSTALLATION
3
15
H250
www.krohne.com 09/2012 - 4002294201 MA H250 KINAX R01 en
3.4.2 Heat insulation
This applies in the same manner to indicators M8 and M10.
CAUTION!
The indicator housing may not be heat-insulated.
The heat insulation 3 may only reach as far as the housing fastening 4.
Figure 3-1: H250 heat insulation
1 Standard indicator M9
2 Indicator with HT extension
CAUTION!
The heat insulation 1 may only reach to the rear of the housing 2. The area of the cable entries
3 must be freely accessible.
Figure 3-2: Insulation - cross section
MA_H250_Sonder_Kinax_R01_en_4002294201_PRT.book Page 15 Monday, September 17, 2012 11:13 AM