KEPCO RKW 600W Series Operator Manual User Manual
Kepco, Operator’s manual, Rkw 600w series power supply
Table of contents
Document Outline
- 1. Introduction
- 1.1 Scope of Manual
- 1.2 Description
- 2. Specifications
- TABLE 1. Output Ratings and Specifications
- TABLE 2. Power Supply Ratings and Specifications
- FIGURE 1. Mechanical Outline Drawing Of The RKW 600W Power Supply
- FIGURE 2. Power Rating Vs. Temperature
- FIGURE 3. Mounting Positions For The RKW 600W Power Supply
- 3. Operation
- FIGURE 4. Locations Of Operating Controls, Indicators and Terminals
- TABLE 3. Function of Controls, Indicators and Terminals
- 3.1 Voltage Adjustment
- 3.2 Remote Voltage Control
- FIGURE 5. Connections For Remote Voltage Control
- 3.3 Remote Turn On-Turn Off
- 4. Alarm Functions
- 4.1 Overvoltage And Overtemperature Protection
- 4.2 Overcurrent Protection
- 4.3 Fan Failure
- 4.4 Optical Coupler Output Alarm Circuit
- FIGURE 6. Output Alarm Circuit, Optically Isolated
- FIGURE 7. RKW 600W Power Failure Timing Diagram
- 5. Load Connection
- 5.1 Connecting The Load Using Local Sensing
- 5.2 Connecting The Load Using Remote Sensing
- FIGURE 8. Correct and Incorrect Methods of Load Connection
- 5.3 Parallel Connection
- FIGURE 9. Parallel Connection with Current Balancing
- 5.3.1 Current Balancing
- 5.3.2 Master-Slave Configurations
- 5.3.2.1 Master-Slave, Multiple Loads
- FIGURE 10. Parallel Connection, Master-Slave, Multiple Loads
- 5.3.2.2 Master-Slave, Single Load
- FIGURE 11. Parallel Connection, Master-Slave, Single Load
- 5.4 Series Connection
- FIGURE 12. Series Connection
- 5.5 Preliminary Electrical Check
- FIGURE 13. Functional Checkout
- 6. Fan Maintenance