KANOMAX 6162 Anemomaster - Manual (Page 33)

4. How to Redisplay, Print and Delete Stored Data 27
SET (8) Move the cursor to 3. SET OK!
Press SET key.
△ , ▽
SET
(9) Select the item to be output.
Then press SET key.
[Printing]
☆ To halt printing temporarily: Press PRINT key
☆ To stop printing completely: Press PRINT MENU key
(10) After printing, it will go back to the page setting screen.
☆ To continue printing, repeat the above procedure.
☆ To finish printing, press MENU key.
4.2.2 Printing Example
RESULT:Only calculation result is output.
DATA: Only measurement data is output.
ALL: Both calculation result and
measurement data are output.
1. START P:005
2. END P:007
3 . SET OK!
< FORMAT >
1 . RESULT
2. DATA
3. ALL
MEMORY
P:001 P:007
1. START P:001
2. END P:001
3 . SET OK!
Measurement Condition
(will be printed all the
time)
Calculation
Result
Measurement
Data
[Average Mode]
2008.07.01 10:57
S-TIME(S) 01
DATA(N) 010
MEMORY
P001
VELOCITY
AVE: 2.58 m/s
MAX: 2.87 m/s
MIN: 1.89 m/s
TEMPERATURE
AVE: 126 ° C
MAX: 129 ° C
MIN: 123 ° C
No. VEL TEMP
(m/s) ( ° C)
1 2.37 126
2 2.83 126
3 2.47 125
4 1.89 124
[Interval Mode]
2008.07.01 10:57
S-TIME(S) 01
DATA(N) 010
INT(min) 060
POINTS
024
MEMORY P001
VELOCITY
AVE: 2.58 m/s
MAX: 2.87 m/s
MIN: 1.89 m/s
TEMPERATURE
AVE: 126 ° C
MAX: 129 ° C
MIN: 123 ° C
No. VEL TEMP
(m/s) ( ° C)
1 2.37 126
2 2.83 125
2008.07.01 10:57
S-TIME(S) 01
DATA(N) 010
POINTS
016
AREA(m2) 0.100
MEMORY
P001
FLOW RATE
15.180 m3/min
910.80 m3/hour
VELOCITY
2.53 m/s
TEMPERATURE
126 ° C
No. VEL TEMP
(m/s) ( ° C)
1 2.37 126
2 2.83 126
3 2.47 125
[Air Flow Mode]