KANOMAX 6162 Anemomaster - Manual (Page 20)

3. Measurement Mode 14
3. Measurement Mode
3.1 How to Measure Average, Max and Min value [Average Mode]
* Data is collected every designated sampling time.
Each data (DATA (N)) is not the average value per sampling time but instantaneous value.
Display Key Procedure
MENU (1) Press MENU key.
△ , ▽
SET
(2) Select 2. MEASUREMENT.
Then press SET key.
△ , ▽
SET
(3) Select 1. AVERAGE.
Then press SET key.
△ , ▽
SET
(4) Select the item that you want to change.
¾ For more information on the each item, please refer to the
“Measurement Condition” on the next page
Then press SET key.
△ , ▽
SET
(5) The item to be changed will be highlighted.
Use △、▽ keys to change the number.
Then press SET key.
(6) For the other items, follow likewise the above procedure
(4) and (5).
Š Average Value
AVE=ΣDATA(N)/N
Š Max & Min Values
MAX=DATA(i)
MIN=DATA(j)
DATA (N) DATA (1) DATA (2) DATA (3)
Sampling Time
----- S-TIME (S)
Measurement Time
----- S-TIME (S) × (No. of Data)
AVERAGE
< MENU >
1. MONITOR
2 . MEASUREMENT
3. DATA OUTPUT
4. MEMORY CLEAR
5. UTILITY
< MEASUREMENT >
1 . AVERAGE
2. INTERVAL
3. FLOW RATE
< AVE >
1 . S-TIME (s) 01
2. DATA (N) 001
3. MEMORY NO
4. PRINT NO
5. SET OK!
< AVE >
1. S-TIME (s) 01
2. DATA (N) 001
3. MEMORY NO
< MENU >
1. S-TIME (s) 01
2 . DATA (N) 001
3. MEMORY NO
< AVE >
1 . S-TIME (s) 01
2. DATA (N) 001
3. MEMORY NO
4. PRINT NO
Sampling Time (sec)
No of data to be collected
Save data? (YES or NO)
Print out calculation result?
(YES or NO)
Use △, ▽ to change