KANOMAX 6036 Multi-function thermal anemometer User Manual - Manual (Page 24)

23
Printout Examples (Measurement Mode)
Measurement Mode
Air Velocity /
Air Temperature
Volumetric Flow /
Air Temperature
Pressure/Air
Temperature
● EXAMPLE
Vel 0.15m/s
Temp 21.8°C
● EXAMPLE
(Rectangular duct)
Duct Shape R Size 2550*2550mm
FlowRate 407.3 m3/h
Temp 22.5
o C
● EXAMPLE
Press 1.03kPa
Temp 20.1°C
● EXAMPLE
(Circular duct)
Duct Shape C Size 2550mm
FlowRate 407.3m3/h
Temp 23.6
o C
Printing Out Stored Data
Procedure of printing the stored data is described below by taking an
example of printing the sixth data group stored in the “Air Velocity /
Air Temperature Measurement Mode”.
Press the key in the measurement
mode. The most recently stored average
value will be displayed.
Select the Data group to be printed by
using the
keys. When selected,
press the key and the reading will
start blinking. Connect the printer.
Press the key again to execute
printing. On the screen, will be
displayed.
To print all data group stored in this mode,
press and hold the
key for approx.
5 seconds until appears on the
screen. All data stored under the relevant
mode will be printed out continuously.
When printing is complete, the display
will return to the measurement mode.