KANOMAX 6036 Multi-function thermal anemometer User Manual - Manual (Page 12)

11
§ 2 Getting Started
Installing Batteries
Backside of the body
1. Press down on the battery cover
with your finger as shown left.
2. Slide the cover toward the
bottom of the instrument until it
stops,
3. Lift the cover away from the
body.
4. Insert the batteries according to
the indicated polarity chart. The
instrument requires six (6) AA
size batteries. Types of batteries
that can be used are: Manganese,
Alkaline, Ni-Cd batteries, or
Ni-MH batteries. The six (6)
batteries must be of the same
type. DO NOT mix different types
of batteries. Failure to observe
this may cause battery leakage
or damage to the instrument.
* Batteries CANNOT be recharged
by the AC adapter.
* When using charging batteries,
please recharge them with the
special charger for those
batteries.
5. Put the cover back on by
reversing the above procedures.
Types of Batteries that can be Used.
 Manganese (R6), AA batteries
 Alkaline (LR6), AA batteries
 Ni-Cd, AA batteries
 Ni-MH, AA batteries