KANOMAX 6036 Multi-function thermal anemometer User Manual - Manual (Page 10)

9
Touch Panel
CLEAR Key:
To clear stored
data.
CALC Key:
To obtain
average, max,
and min.
STORE Key:
To store
current
measurement
data.
MODE Key:
To change
measurement mode.
SHAPE Key:
To select duct type
and size for
measuring volumetric
flow rate.
ENTER/HOLD Key:
1. To put the current
display on hold
during a
measurement.
Press the key again
to release hold.
2. To confirm current
setting.
UNIT Key:
To select the unit
of each parameter
and to set the
communication
baud rate.
▲▼ Key:
1. To move the
cursor for
selecting an item
and setting
values.
2. To scroll through
the stored data.
TIME CONS. Key:
To select the time
constant for
measurements.
MR/PRINT Key:
1. To view stored
data.
2. To printout
stored data.
* ZERO Key:
To provide zero
adjustment in
pressure
measurement mode
* MODEL 6035-00/
6035-A0/
6036-00/
6036-A0
is not equipped with
ZERO Key