GW Instek SFG-830 Software Manual - Manual (Page 2)

Page 2
For example, if users edit a signal in ARB software, maybe like this…
If users want to output 10Vpp maximum from SFG-830’s RF output, he should set voltage
amplitude on SFG-830 panel is 10Vpp first (AMPL Ж 1 0 Ж Vpp)
When the signals send out from ARB software, it will become:
(0.5 x 10Vpp = 5Vpp, 1 x 10Vpp = 10Vpp)
For the same reason, if users want to set 3Vpp, 5Vpp, or another amplitude voltage, they
also can follow this method.
0.5Vpp
1Vpp
0.5 Vpp
1 Vpp
5Vpp
10 Vpp
Enlarge to
decuple