GW Instek GAD-201G - Manual (Page 4)

GAD-201G user manual
5
Full Scale
The instrument uses a special extended scale with the reading range
larger than the conventional full scale:
Conventional Extended
0 to 1.0 0 to 1.12
0 to 3.1(3.2) 0 to 3.5
-20 to 0dB -20 to +1dB
-20 to +2dBm -20 to +3.2dBm
The rated value of full scale expressed in term of 1.0 on the 0~1.12 scales.
Set the pointer to “1.0” on the outermost scale.
WARNING. Avoid applying any external signal to the X-Y
output terminal to prevent the Distortion Meter from
damage.
The equipment shall not be used for measurements within
category I, II, III and IV.
WARNING. To avoid personal injury, disconnect the
power cord before removing the fuse holder.
GAD-201G user manual
6
4. PANEL INTRODUCTION
z Front Panel