GW Instek GVT-427B - Manual (Page 9)

GVT-427B User Manual
16
Maintenance
This section includes the basic maintenance information for
GVT-427B.
Cleaning
To clear GVT-427B, use soft cloth dampened in a solution of mild
detergent and water. Do not spray cleaner directly onto the
instrument, since it may leak into the cabinet and cause damage.
Do not use chemicals containing benzine, benzene, xylene, acetone,
toluene, or similar solvents.
Do not use abrasive cleaners on any portion of this equipment.
Troubleshooting
Troubleshooting the GVT-427B is limited to checking the input
power fuse. If you have other operational difficulties with your
GVT-427B, contact your Good-Will representative for assistance.
WARNING. To avoid electrical shock, the power cord
protective grounding conductor must be connected to
ground.
WARNING. To continued fire protection. Replace fuse
with the specified type and rating, and disconnect the
power cord before replacing fuse.
GVT-427B User Manual
17
Interchangeable Parts
Interchangeable parts can be ordered from your authorized Goodwill
dealer directly.
Accessories
The items are shipped with the GVT-427B as following:
Table 2: Accessories
Accessory Good Will Part Number
Test Leads GTL-101 x 2
(for GVT-427B)
1100-TL101U0
User Manual
82VT-427B0MC