Spare parts – Detcon DM-200 User Manual
Page 31
Model DM-200
DM-200 Instruction Manual
Rev. 2.0
Page 27 of 40
8. Spare Parts
Part Number
Spare Parts
922-000000-000
200 Universal Xmtr Module
600-003097-000
Model DM-200 SS Splash Guard Adapter
370-XXXX00-XXX
Replacement Plug-in toxic gas sensor (Refer to Table 3)
392-XXXX0S-XXX
Replacement ISM Modules with Sensor Cell (Refer to Table 6)
Sensor Accessories
613-120000-700 Sensor
Splashguard with integral Cal Port
327-000000-000 Programming
Magnet
960-202200-000 Condensation
prevention
packet (for J-Box replace annually)
360-000001-00
UniTox Battery Backup Module
Calibration Accessories
943-050000-132
Span Gas Kit: Includes calibration adapter, span gas humidifier,
500cc/min fixed flow regulator, and carrying case. (Not including
gas).
943-050000-HRG
Highly Reactive Gas Span Gas Kit (Used for NH
3
, Cl
2
, HCl, HBr, etc.)
See Detcon
Span Gasses
943-05AM00-000
500 cc/min Fixed Flow Regulator for span gas bottle
943-000000-000
Wind Guard for Splashguard
Recommend Spare Parts for 2 Years
922-000000-000
200 Universal Xmtr Module
600-003215-000
Splash Guard Adapter
370-XXXX00-XXX
Replacement Plug-in toxic gas sensor (Refer to Table 3)
392-XXXX0S-XXX
Replacement ISM Modules with Sensor Cell (Refer to Table 6)
960-202200-000 Condensation
prevention
packet (for J-Box. Replace annually)
Connector Base Assembly
P/N 602-002367-000
Enclosure Cover
with Window
Condensation Prevention
Packet
P/N 9
60-202200-000
DM-200 Universal
Transmitter Module
P/N 922-000000-000
Condensation Prevention
Packet
P/N 9
60-202200-000
Splash Guard Assembly
P/N 613-120000-700
Intigent Sensor Module
P/N 392-XXXX0S-XXX
Figure 17 Spare parts Breakaway
Humidisorb packets eliminate condensation from forming in the condulet enclosure thus preventing problems
such as corrosion and stray signal drift. Use of the Humidisorb packet greatly extends the service and
problem-free operating life of the gas sensor in both tropical and cold weather extremes. Although the
Humidisorb packet is designed for continuous use, it should be replaced on an annual basis for optimal
performance.