Detcon IR-642 - Manual (Page 23)

3.16 W ARRANTY
Detcon, Inc., as manufacturer, warrants each NDIR optical plug in sensor (part no. 370-365878-111 or 370-287724-
232), for a pro-rated f ive year period under the conditions described as follows: The warranty period begins on the
date of shipment to the original purchaser and ends f ive years thereafter. The sensor element is warranted to be free
from defects in material and workmanship. Should any sensor fail to perform in accordance with published specif i-
cations within the warranty period, return the defective part to Detcon, Inc., 3200 A-1 Research Forest Dr., The
Woodlands, Texas 77381, for necessary repairs or replacement.
3.17 S
ERVICE
P
OLICY
Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control circuit to
be free from defects in material and workmanship for a period of two years from the date of shipment to the origi-
nal purchaser. Detcon, Inc., further provides for a f ive year f ixed fee service policy wherein any failed transmitter
shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a f ixed fee of $65.00. The f ixed fee service
policy shall affect any factory repair for the period following the two year warranty and shall end f ive years after
expiration of the warranty. All warranties and service policies are FOB the Detcon facility located in The
Woodlands, Texas.
3.18 S
OFTWARE
F
LOW
C
HART
Detcon Model IR-640/IR-642 Carbon Dioxide Sensor PG.23
Spash Guard
Rain Shield
Enclosure less cover
IR Connector Board
Calibration Adapter
Enclosure glass lens cover
Plug-in control circuit
Field replaceable plug-in optical sensor
IR Sensor Housing Assembly
Programming Magnet
Condensation
Prevention Packet
(replace annually)
Figure #8