DeFelsko PosiTector PC v.2.0 - Manual (Page 3)

Up
Down
Center
To navigate, use the Up and Down buttons to
scroll and to SELECT.
Select Exit to exit from any menu.
Navigation Button
The center button is purposely recessed to help eliminate
unintentional power-up.
When no probe is attached, a limited menu will be displayed.
Connect probe for full menu.
Menu Operation Menu Operation
Gage functions are menu controlled. To access the Menu,
power-up the PC Probe and PosiTector body, then press the
center navigation button.
NOTES:
2
Power-up both units. Bring the probe to within 5 cm (2 inches) of
the coating powder.
Press and hold the button. Bring the probe closer to the powder.
While watching the probe display, align the Distance Paddle with
the Distance Target Bar. (pg 3)
While the probe button is depressed, probe distance and angle
should be varied slightly keeping:
(a) the Distance Paddle close to the Distance Target Bar
(b) the Amplitude Indicator at maximum height (pg 3).
Release the button when you hear a double BEEP or see a
thickness measurement on either display.
How to Measure How to Measure