DeFelsko PosiTector PC v.2.0 User Manual

Page 14

The Gage may perform a Hard Reset after an update

(see pg 9).

Updates

Determines if a software update is available for your Gage.
See www.defelsko.com/update

WARNING:

Displays menu options that enable the PosiTector body to
communicate with wireless PosiTector PC probes.

Powder Probes

List

Add New

Connect

Probe Off

Change Order

Displays all previously connected PC probes.

Allows PosiTector body to pair with a wireless PC probe for
the first time.

When selected, the PosiTector body will display, “Ensure

probe is turned on and in reset state before continuing!”
Refer to Full Guide for Probe RESET instructions at
www.defelsko.com/manuals

Select Next. The PosiTector body will search for available

PC probes.

Select the PC Probe to connect. PC Probes are displayed

by their serial numbers.

Select which PC probe the PosiTector body will connect to first
during power-up.

Disconnects PC probe from PosiTector body and causes the PC
probe to power off. If a physically connected probe is attached,
the PosiTector will automatically recognize it.

Allows PosiTector body to connect to or switch between
wireless PC probes and physically connected probes. PC
probe must be turned on.