DeFelsko PosiTector 200 v.3.0 Quick Guide - Manual (Page 8)

7
Reset
Reset (soft reset) restores factory settings and returns the Gage to
a known condition. The following occurs:
- All batches, stored measurements, images, batch names and
screen captures are erased.
- All calibration and range adjustments are cleared and returned
to the Gage’s factory settings.
- Menu settings are returned to the following:
Memory = OFF
Graphics = ON
Cal Lock = OFF
Bluetooth = OFF
Display = None
Perform a more thorough Hard Reset by powering down the
Gage, waiting several seconds, then simultaneously holding both
the center and (+) buttons until the Reset symbol
appears. This returns the instrument to a known, “out-of-the-box”
condition. It performs the same function as a menu Reset with the
addition of:
Date, Time and WiFi are not affected by either Reset.
Units = microns
Flip Display = Normal
White on Black = OFF
Language = English
Battery Type = Alkaline
Backlight = Normal
USB Drive= ON
Auto Sync = OFF
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Setup Menu Setup Menu
Selects the type of batteries used in the Gage from a choice of
“Alkaline”, “Lithium” or “NiMH” (Nickel-metal hydride
rechargeable). If NiMH is selected, the Gage will trickle charge the
batteries while connected via USB to a PC or optional AC charger.
The battery state indicator icon is calibrated for the selected
battery type. No damage will occur if the wrong battery type is
selected.
DeFelsko recommends the use of eneloop (NiMH)
rechargeable batteries.
Battery Type
Layers = 1
Layer Name = Layer 1
Layer Color = blue
NOTE:
NOTE: