DeFelsko PosiTector 200 v.3.0 Quick Guide User Manual

Page 11

Accessing Stored Measurements Data

PosiSoft solutions for viewing, analyzing and reporting data:
PosiSoft USB Drive - connect the PosiTector to a PC/Mac using

the supplied USB cable to access and print stored readings, graphs,

photos, notes and screen captures. No software or internet

connection required. USB Drive must be selected. (see pg.11)
PosiSoft.net - a free web-based application offering secure

centralized storage of PosiTector readings. Access your data from

any web connected device. Go to: www.PosiSoft.net
PosiSoft Software - Desktop Software for downloading, viewing

and printing your measurement data.
PosiSoft Mobile (Advanced models only) - access readings, graphs,

capture photos and update annotations through WiFi enabled

devices, such as tablets, smart phones and computers.

Advanced models

store 100,000 readings in up to 1,000

batches. “New Batch” closes any currently opened batch and

creates a new batch name using the lowest available number. The

icon appears. New batch names are date stamped when they

are created.

Scroll through display

modes (Advanced only)
Delete last reading
Access the Menu

Create a new batch

(Advanced only)

Restore brightness

after dimming

(Advanced only)

The PosiTector 200 has internal memory storage for recording

measurement data. Stored measurements can be reviewed

on-screen or accessed via computers, tablets and smart phones.

Measurements are date and time-stamped.

Standard models

store up to 250 readings in one batch.

This Quick Guide summarizes the basic functions

of the Gage. Download the full instruction manual at:

www.defelsko.com/manuals

Memory Management

NOTE: