DeFelsko PosiTector 200 v.3.0 Quick Guide - Manual (Page 10)

9
Advanced models of the PosiTector 200 are capable of
numerically displaying up to 3 individual layer thicknesses in a
multi-layer system.
Select the Layers menu option to:
- Choose up to 3 individual layer thickness values.
- Edit layer names and Batch Chart colors.
• Before setting up the Gage for multi-layer measurement, it
is recommended that you first take measurements in single
layer mode and interpret the results using the Graphics
option. (see pg. 8)
• When a batch is Open, press the Up button to view the
Batch Chart.
Layers
(Advanced models only)
Cursor - The Cursor allows for further analysis of displayed
waveform. Use the (-)(+) buttons to move the green cursor line left
or right over the waveform. The thickness value is displayed at the
top right of the cursor line. This feature is particularly
useful in multi-layer applications where there are more than
3 distinct layers.
Screen Capture - Press to capture and save an image
copy of the current display. The last 10 screen captures are stored
in memory and can be accessed when connected to a computer.
(see PosiSoft USB Drive pg. 10)
Press and hold the (-)(+) buttons simultaneously to
capture any screen.
Menu - Press to access the Gage’s main menu.
Exit - Press to close the Graphics display. Press the Up
button to return to the Graphics display.
Shortcut:
NOTES: