Accessing stored measurements data – DeFelsko PosiTector 6000 v.7.3 Quick Guide User Manual
Page 8

7
Determines if a coating system complies with the IMO
performance
standard
for
protective
coatings.
See www.defelsko.com/9010
New PA2
New 90/10
Helps determine if film thickness over a large area conforms to
user specified min/max levels. See www.defelsko.com/pa2
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Create a new batch
(Advanced only)
Restore brightness
after dimming
(Advanced only)
This Quick Guide summarizes the basic functions
of the Gage. Download the full instruction manual at:
www.defelsko.com/manuals
NOTE:
Screen Capture
Press both (-)(+) buttons at any time to capture and save an image
copy of the current display. The last 10 screen captures are stored
in memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 7).
Accessing Stored Measurements Data
Accessing Stored Measurements Data
PosiSoft solutions for viewing, analyzing and reporting data:
PosiSoft USB Drive - connect the PosiTector to a PC/Mac using
the supplied USB cable to access and print stored readings, graphs,
photos, notes and screen captures. No software or internet
connection required. USB Drive must be selected. (see pg.8)
PosiSoft.net - a free web-based application offering secure
centralized storage of PosiTector readings. Access your data from
any web connected device. Go to: www.PosiSoft.net
PosiSoft Software - Desktop Software for downloading, viewing
and printing your measurement data.
PosiSoft Mobile (Advanced models only) - access readings, graphs,
capture photos and update annotations through WiFi enabled
devices, such as tablets, smart phones and computers.