DeFelsko PosiTector 6000 v.7.3 Quick Guide - Manual (Page 7)

Memory Management Memory Management
The PosiTector 6000 has internal memory storage for recording
measurement data. Stored measurements can be reviewed
on-screen or accessed via computers, tablets and smart phones.
Measurements are date and time-stamped.
Advanced models store 100,000 readings in up to 1,000
batches. “New Batch” closes any currently opened batch and
creates a new batch name using the lowest available number. The
icon appears. New batch names are date stamped when they
are created.
Standard models store up to 250 readings in one batch.
Battery Type
Statistics Mode Statistics Mode
A statistical summary will appear on the display. Remove the last
measurement by pressing the (-) button. Press (+) to clear
statistics.
Statistics
HiLo Alarm
x
Allows the Gage to visibly and audibly alert the user when
measurements exceed user-specified limits.
σ - Standard Deviation
↓ - Minimum Value
x - Average
↑ - Maximum Value
Selects the type of batteries used in the Gage from a choice of
“Alkaline”, “Lithium” or “NiMH” (Nickel-metal hydride
rechargeable). If NiMH is selected, the Gage will trickle charge the
batteries while connected via USB to a PC or optional AC charger.
The battery state indicator icon is calibrated for the selected
battery type. No damage will occur if the wrong battery type is
selected.
DeFelsko recommends the use of eneloop (NiMH)
rechargeable batteries.
NOTE:
6