Catskill Craftsmen 1480DOR - Manual (Page 15)

Lay Top upside-down on flat smooth surface and screw on the “L” brackets using 5/8” #6 flat
head screws as in illustration. Attach the “L” bracket to the top using the hole, not the slot on the
“L” bracket. Then flip assembled unit upright and attach the Top to the assembled unit using 5/8”
#6 flat head screwsthrough the “L” brackets into the pilot holes in the top side brace
5/8” #6 Flat Head Screws
STEP 12
Tabletop
STEP 11
Castors and Shelf Pins
A. Upright the unit.
B. Insert (6) 1 1/2”
pins into the pin holes
at the bottom (1 in
each leg and 1 in
each bottom brace).
The Middle Shelf has
3 adjustable heights,
determine which height
to use and insert the
1 1/2” pins into the
appropriate holes in
the legs, as the Middle
Shelf is adjustable.
1 1/2” pin