Avigilon Lenel On Guard Integration - Manual (Page 8)

Avigilon Control Center System Integration Guide with Lenel OnGuard
5
OnGuard Configuration
After the Avigilon cameras have been configured for use in the OnGuard software, configure
OnGuard to interact with the Avigilon Control Center servers and add the Avigilon cameras into
the OnGuard software.
Adding Avigilon Servers
1. Open the OnGuard System Administration software.
2. Select Video > Digital Video.
3. Select the Video Recorder tab.
4. Select Add to configure a new server.
5. In the Name field, enter a name for the server.
6. In the Video Recorder Type drop down list, select Avigilon Control Center.
7. In the Workstation field, enter the name of the OnGuard server running the
communications server.
8. In the Use IP Address of Video Recorder field, enter the Avigilon server IP address.
9. In the Port field, enter the Avigilon server port number.
10.Enter the server’s User Name and Password. Use the Avigilon username and
password you created for the integration. See Adding an Integration User in Avigilon
on page 4 for more information.
11.In the World Time Zone drop down list, select a time zone.
12.Click OK to save the settings.