Avigilon Lenel On Guard Integration - Manual (Page 6)

Avigilon Control Center System Integration Guide with Lenel OnGuard
3
Avigilon Configuration
Once the required licence and software have been installed, configure the Avigilon cameras for
use in the OnGuard software.
All Avigilon camera settings are configured in the Avigilon Control Center Client software. See the
Avigilon Control Center Client User Guide for more information.
Assigning Logical IDs to Cameras
In the Avigilon Control Center Client software, assign a logical ID to each camera. The OnGuard
software will only detect cameras with a logical ID. By default, cameras do not have a logical ID.
1. In the Avigilon Control Center Client software, right-click a camera in the System
Explorer and select Setup.
2. In the camera Setup dialog box, click General.
3. In the General settings dialog box, enter a Logical ID for the camera.
The logical ID must be unique number.
The logical ID should have no more than 5 digits.