Adding all cameras on a server – Avigilon Lenel On Guard Integration User Manual

Page 10

Avigilon Control Center System Integration Guide with Lenel OnGuard

5. If you want motion alarm events to be displayed, select the Display Motion Detection

Alarms check box.

6. Leave the PTZ controlled by Matrix Switches field empty.

If you have a PTZ camera, the PTZ controls are automatically enabled in the OnGuard
software.

7. Click OK.

8. Repeat this procedure for each Avigilon camera.

Adding All Cameras on a Server

If you are using Lenel OnGuard version 6.5.624 or 6.6.286, you have the option to import all
available cameras at once.

1. In the Video Recorder tab, right-click the connected Avigilon server and select Import

From Recorder.

2. In the following dialog box, select all the cameras you want to import.

NOTE: Only cameras with logical IDs are listed.See Assigning Logical IDs to Cameras on page 3

for more information.

•

Click a camera on the Available list to add it to the Import list.

•

Or, click Select all to add all available cameras to the Import list.