Avigilon Jacques IP Intercom Integration - Manual (Page 4)

Avigilon Control Center 5 System Integration Guide with Jacques VoIP Voice Communication System
1
Introduction
The Avigilon Control Center software integration with the Jacques VoIP Voice
Communication System allows alarms in Avigilon Control Center to be triggered
whenever an intercom event is activated in the Jacques System.
The Jacques system uses tags to communicate events between intercom units. Tags are
a series of numbers that users dial to call other intercom units and initiate specific actions.
The integration enables tags to be linked to specific Avigilon alarm actions. A possible use
case for the integration is for users to view video from a camera pointed at an intercom
station. When a tag is dialed from the Jacques intercom station, the corresponding alarm
is triggered in the Avigilon Control Center Client and the alarm video is displayed.
Requirements
For More Information
For more detailed information about the procedures outlined in this guide, refer to the
specific software documentation.
• Avigilon Control Center Client User Guide
• Avigilon Control Center Server User Guide
• Tag Configuration for Jacques 650-series VoIP Voice Communication System
Vendor Requirements
Avigilon Control Center Server Software 5.x or later
Avigilon Avigilon Third Party Integration License:
ACC5-JAQS-INTCM
Avigilon Avigilon Jacques Gateway software integration:
JacquesGateway.exe
The file can be downloaded at
http://avigilon.com/support-and-downloads/for-software/integration-
and-plug-in-downloads/
Jacques Jacques 650 Series VoIP Voice Communication System
Jacques High Level Interface (HLI)