Aposonic A-S0802R18 - Manual (Page 70)

- 70 -
6.10.1 E-mail Setup
In Network Setup, press ENTER to call up E-mail Setup as shown when the
highlighted option is E-mail.
The E-mail Setup allows the administrator to set e-mail related parameters. When
an event occurs and E-mail is enabled for the corresponding action, an e-mail will be
sent based on the parameters set here.
The general operations are as below:
„
▲▼ (Mouse: Left click)
Press these buttons to select the items.
„
ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Network Setup display.
If the Save dialog is shown, press ENTER to exit and save, ESC
(Mouse:
Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:
„
SMTP Server – SMTP mail server name. Please follow the Text Input method
described in Section 4.1 to modify this item.
„
SMTP Port – the SMTP port for e-mail transmission. The default value is 25.
Please follow the Text Input method described in Section 4.1 to modify this item.
„
Authentication – whether the SMTP mail server requires authentication. Press
ENTER or +/- to check/uncheck this item.