Additel Cal User Manual - Manual (Page 28)

28
Chapter 10 Scan Ports
10.1 Possible communication problems
? Be sure the cable is connected to the reference properly, and to your PC's serial port as well. Consult your reference's documentation for the
correct method of connection.
? Programs that use a serial port to connect to other external devices, such as Palm Pilots, should be shut down when using this program with
that same serial port. The computer needs to recognize that the COM port is free, and can be used for communication with the reference.
10.2 Procedures
To communicate with the reference, you could manually build the connection by clicking the “Scan Reference” button on the left bottom of the
screen.See figure 10.2 below.
Figure 10.2
10.3 Serial Port Parameters
Port : Auto-scan the port connected with the reference.
BaudRate : 9600.