Additel Cal User Manual - Manual (Page 25)

25
8.2.1 Result List
Identity Field : This is the unique name of the instrument.
Type Field : For a more detailed explanation, see chapter 11.5.
TaskState Field : If the calibration process has been performed, so this field displays "Calibrated" , otherwise, it displays “Not Calibrated”;
Instrument Field : If the instrument has exist in the database, so this field displays “Instrument : XXXX”(XXXX: the Identity of instrument) ,
otherwise you must add a new instrument by clicking the “Add New Instrument” button on this field.
Delete Field : You can delete the data from the reference by clicking the “Delete” button on this field.
8.2.2 Result Detailed Explanation
When you select the different record in the list on the left, the detail calibration results in the Result Detailed Explanation Area will be refresh.
8.3 Erase All Tasks From Reference
After building the connection with the reference, you could delete all the calibration results displayed in the Result List from the reference by
clicking the “ Erase All Tasks From Reference ” button on the Toolbar.
Note:Before you perform the deletion, you must keep the reference’s operating screen out of task manager if the model of reference is ’
ADT223A’.
8.4 Save
After building the connection with the reference, you could receive the calibration results which must be checked on the first column of the
Result List by clicking the “ Save ” button on the Toolbar.
Note: Before the receiving, the calibration process must been performed, and the instrument must exist in the database.