Additel Cal User Manual - Manual (Page 15)

15
5.1.3 Delete Instrument
To delete a instrument, you must select the Instrument record by clicking the tool strip button labeled “Delete Instrument” on the Instruments Toolbar.
Note:The Calibration Results, Tasks and Send tasks associated with the instrument also will be removed.
5.1.4 Find Instrument
To query instruments, you must set up query conditions by clicking the tool strip button labeled “Find Instrument” on the Instruments (See figure
5.1.4.1 below).
5.1.4.1 Find Instrument Screen
Identity: You can enter part or all of the information.
Update Date: You can set up the timespan of the record which was updated.
Note:If you need the field to query, please set up it checked.
5.1.5 Export Wizard
To export all the instruments displayed in the Instrument Area, by clicking the tool strip button labeled “Export Wizard” on the Instruments
Figure 5.1.4.1