Additel Cal User Manual - Manual (Page 12)

12
5.1 Instruments Area
When you open this screen, all the instruments data will be reloaded and displayed. Each record in this list represents a instrument, and the modified
record is displayed at the top of the list. When you select the different record in list, the calibration results in the Calibration List Area and tasks in
the Tasks List Area will be loaded.
5.1.1 New Instrument
To add a instrument, you must specify the Instrument Type (For a more detailed explanation, see chapter 11.5 ) by clicking the tool strip button
labeled “New Instrument” on the Instruments Toolbar.
For example, if you want to add a ‘Digital Pressure Gauges ’ Instrument, click the “Digital Pressure Gauges”, see figure 5.1.1.1 below
Figure 5.1.1.1