WEN 70712 12 Sliding Compound Miter Saw - Manual (Page 8)

ITEM 70712 OPERATOR’S MANUAL 8
6. Allow the motor to come up to full speed before starting a cut to avoid binding or stalling.
7. Never leave your Miter Saw unattended. Release the ON/OFF trigger and don't leave until
the blade has come to a complete stop.
8. Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing your Miter Saw. This preventive safety measure reduces the risk of
starting your Miter Saw accidentally.
9. Use the recommended accessories listed in this Operator's Manual. The use of improper
accessories may cause an injury.
10. Keep guards in place and in working order. Never operate your Miter Saw with any guard or
cover removed. Make sure all guards are operating properly before each use.
11. Form a habit of checking to see that keys and adjusting wrenches are removed from Miter
Saw before turning it ON.
12. Don't force your Miter Saw. It will do the job safer and better at the rate for which it was
designed.
13. Always support large work pieces while cutting to minimize the risk of blade pinching and
kickback. Your Miter Saw may slip, walk or slide while cutting large or heavy boards.
14. Do not remove jammed, cutoff pieces until the blade has stopped.
15. Never start your Miter Saw when the blade is in contact with the work piece.
16. Never touch the blade or other moving parts during use.
17. Before changing the setup, remove the covers, guards or blades and unplug your Miter Saw.
18. Always turn OFF your Miter Saw before disconnecting it.
19. Store your Miter Saw out of the reach of children and do not allow people unfamiliar with
your Miter Saw or these instructions to operate it. A Miter Saw is dangerous in the hands of
untrained users.
WARNING: Maintain your Miter Saw. Keep your Miter Saw clean for maximum
performance. Follow the instructions for lubricating and changing accessories. Keep
your Miter Saw dry, clean and free from oil and grease. Always use a clean cloth
when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents to
clean your Miter Saw.
20. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect your Miter Saw's operation. If damaged, have your Miter Saw
repaired professionally before use. Many accidents are caused by a poorly maintained Miter
Saw.
21. Use your Miter Saw in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of your Miter Saw for operations different
from those intended could result in a hazardous situation.