2specifications, System specification – USGlobalsat DG-100 User Guide User Manual
Page 5

DG-100
page 5
2
Specifications
System specification
Electrical Characteristics
GPS standard SiRF StarⅢ/LP Single
GPS Antenna Built-in patch antenna
Operation time Up to 20 hrs +
Charge time 7 hrs
Battery Charging USB connector @ 350mah
POWER BUTTON
Power On/Off Press and hold for 3 second to On/Off the device.
Instant Save Press button once to save a waypoint manually when
device is active.
STATUS LED’S
GPS status Flashing Green – GPS position is fixed.
Steady Green
– GPS position is not fixed.
Power status Solid Red
– Device is power on.
Flashing Red
– Device is in low battery power.
Solid Amber
– Battery is being charged.
Memory status Flashing Blue
– Memory is 2/3 full.
Solid Blue
– Memory is full.
TEMPERATURE
Operating -20°C ~ 50°C (-4°F ~ 122°F)
Storage -20°C ~ 35°C (-4°F ~ 95°F)
Humidity Operational up to 95% non-condensing
SLIDE SWITCH
One Slide Switch There are three customized setting of intervals.
A (interval 1 Time or Distance selectable)
B (interval 2 Time or Distance selectable)
C (interval 3 Time or Distance selectable)
BATTERY
Battery Type Two NiMh Rechargeable Battery
MECHANICAL
Dimension 3.15 x 2.15 x 0.7 (80mm x 54.6mm x 17.8mm)