USGlobalsat GH-561 User Manual - Manual (Page 8)

GH-561
Page 7
Press and hold the Power button for 2
seconds to turn on the device. You will see
the welcome screen displayed.
Allow the GH-561 a short period of time to
track satellites for the first time you use it.
Take your GH-561 outside or to an open
space with a clear view to the sky and it will
make acquiring a satellite signal easier.
Press the ‘’OK’’ button to exit the Locating
Satellites screen.
4.2. Icon Explanation
The battery icon indicates the remaining
battery power. Blinking means the
device has little battery power left.
E-Compass status indicator
- Blinking: The E-Compass is experiencing
magnetic interference or is unstable, the
device will need to be re-calibrated.
GPS status indicator
No bars: No signal
Blinking: 2D fix
Solid: 3D fix
Solid with 1 bar: 3D fix with poor signal
Solid with 2 bars: 3D fix with good signal
Solid with 3 bars: 3D fix with strong signal
5. Routes
5.1 Start Route
If you want to do geo-caching or navigate, you can perform it by following these
steps:.
1. Press the button to select a route you
have already planned on your PC and then