USGlobalsat GH-561 User Manual - Manual (Page 15)

GH-561
Page 14
to main menu
9.4 GPS Setting
Turn on/off the ‘’WAAS/ENGOS’’
feature.
Press button to exit or go
back to main menu.
9.5 Route Setting
Switch distance means the setting of threshold
detected distance for routing navigation.
1. There are 25m,50m,100m,200m,
300m, 500m) for selecting. The default
setting is 100m.
2. It is recommending to set 50m for
walking, and 100m for cycling.
3. If the speed range is higher than the
switch distance should be above 100m
to get accurate navigation.
Press button to exit or go
back to main menu
9.7 Set Units
The measurement unit can be set as
"statute" or "metric" or ‘’nautical’’.
.
Press button to exit or go
back to main menu
9.8 GPS Info
In this screen you can see the positioning
status of how many satellite signals are
obtained and their signal strength.
Press button to exit or go
back to main menu