Lane end d.h.moppett (man. director), Distributor – Universal Air Tools UT3DC User Manual

Page 4

Notes

Page No 4

Accessories

Declaration of Conformity

Universal Air Tool Company Limited

Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England

declare under our sole responsibility that the product

Models UT3/UT3DC Dual Action Sanders, Serial Number

to which this declaration relates is in conformity with the following standard(s) or other normative document(s)

EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 8, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives

Place and date of issue

Name and signature or equivalent marking of authorised

Lane End

D.H.Moppett (Man. Director)

This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool

Distributor

Designed & Written in the U.K.

16) Do not install the tool unless an easily accessible and
easily operable on/off valve is incorporated in the air supply.
17) Take care that the tool exhaust air does not cause a
problem or blows on another person.
18) Never lay a tool down unless the working attachment
has stopped moving.
19) Always check the speed of the attachment is higher
than the speed of the tool.
20) Check speed of tool at regular intervals.
21) Check always that the material to be sanded may not
cause a risk by being sanded, i.e. fire or explosion.
22) If self fixing discs are used, i.e. self adhesive or Velcro,
always ensure the disc is fixed centrally to the pad.

This manual is related to the following products:

UT3 (HLC3)