Universal Air Tools UT8735 - Manual (Page 4)

Distributor
Notes
Page No 4
Accessories
Declaration of Conformity
Universal Air Tool Company Limited
Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England
declare under our sole responsibility that the product
Model UT8735 Extended Die Grinder, Serial Number
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 13, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives
Place and date of issue Name and signature or equivalent marking of authorised person
Lane End D.H.Moppett (Man Director)
This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Company Limited
©Copyright of Universal Air Tool Company Limited, established in the United Kingdom, 1994
Designed & Written in the U.K.
3) Always shut off the air supply to the grinder and depress the lever to
exhaust air from the feed hose before fitting, adjusting or removing the
mounted point.
4) Always adopt a firm footing and/or position before using the grinder.
5) Use only correct spare parts.
6) Check hose and fittings regularly for wear. Do not carry the tool by its
hose.
7) Do not remove and never tie down the safety lever.
8) Never exceed the maximum air pressure and check the free running
speed frequently. Have air regulator fully open when making speed
checks.
9) Use safety equipment as recommended.
10) Take care against entanglement of moving parts of the tool with
clothing, ties, hair, cleaning rags, etc.
11) Use only compressed air at the recommended pressure.
12) Do not attempt to fit any other attachment than those
recommended - see "Foreseen Use of Tool".
13) If the tool appears to malfunction, remove from use immediately,
and arrange for service and repair.