Declaration of conformity, Model ut5715 die grinder (r/a head), serial number, Safety rules when using a die grinder – Universal Air Tools UT5715 User Manual

Page 4

Distributor

Notes

Page No 4

Accessories

Declaration of Conformity

declare under our sole responsibility that the product

Model UT5715 Die Grinder (R/A Head), Serial Number

to which this declaration relates is in conformity with the following standard(s) or other normative document(s)

EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 17, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives

Place and date of issue

Name and signature or equivalent marking of authorised person

Safety Rules When Using A Die Grinder

1) Read all the instructions before using this tool. All operators

must be fully trained in its use and aware of these safety rules.

2) Always select suitable abrasive to use with this tool - see

Operating Instructions.

3) Always shut off the air supply to the grinder and depress the

lever to exhaust air from the feed hose before fitting, adjusting

or removing the mounted point.

4) Always adopt a firm footing and/or position before using the

grinder.

5) Use only correct spare parts.

6) Check hose and fittings regularly for wear. Do not carry the

tool by its hose.

7) Do not remove and never tie down the safety lever.

8) Never exceed the maximum air pressure and check the free

running speed frequently. Have air regulator fully open.

9) Use safety equipment as recommended.

10) Take care against entanglement of moving parts of the tool

with clothing, ties, hair, cleaning rags, etc.

11) Use only compressed air at the recommended pressure.

12) Do not attempt to fit any other attachment than those

recommended - see “Foreseen Use of Tool”

13) If the tool appears to malfunction remove from use

immediately and arrange for service and repair.

Designed & Written in the U.K.

Universal Air Tool Company Limited

Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England

Lane End

D.H.Moppett (Man. Director)

This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Company Limited