Triton 9670 Operation Manual - Manual (Page 45)

4-9
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
T RITON S YSTEMS , I NC .
S
ECTION
4 - H
ANDLING
C
ASSETTES
M
ODELS
9650/9670
R
EMOVING THE
R
EJECT
V
AULT
The Reject Vault is locked when it is removed from the dispensing mechanism. The color indicator
shows a green window when the Reject Vault is opened for note collection (inside the dispensing
mechanism) and when it is ready for use.
The color indicator shows a red window when the Reject Vault is inserted into the dispensing
mechanism and until it is opened for rejected note retrieval.
1. UNLOCK the cassettes, using the Cassette Lock/Unlock procedure in Section 5, Management
Functions.
2. Open the outer fascia panel of the security container, using the key lock on the front of the
panel. Open the combination lock on the security container door and open the door to gain
access to the dispensing mechanism.
IMPORTANT! If you remove the Reject Vault with power applied, the terminal will sense this
and automatically reset the rejected note count to ZERO. Therefore, to ensure an accurate
rejected note count NEVER REMOVE THE REJECT VAULT WITH POWER APPLIED WITH-
OUT CHECKING FOR AND REMOVING ANY REJECTED NOTES.
3. To remove the Reject Vault, grasp the Vault handle with one hand while holding the mechanism
in place with the other hand. Pull the Vault out slightly. Place one hand under neath to support
the Vault as you slide it completely out of the unit. Place it on a level surface.
Figure 4-14. Removing Reject Vault.