Triton RL5000 X2 Series User Manual - Manual (Page 31)

2 7
C ASSETTE C LOSE / C ASH R EPLENISHMENT
L
OADING THE
C
URRENCY
C
ASSETTE
1. Unlock and open the cassette lid using the supplied key. Move the pusher plate to the rear of the
cassette (toward the handle).
Note: The pusher plate action will depend on the type of cassette in use. Some cassettes require you to
maintain pressure on the pusher plate as needed while loading notes. Other cassettes use a locking mechanism
to hold the packer plate in the loading position. On these cassettes, pull the pusher-plate all the way back
to the handle end of the cassette and turn the key to latch the pusher plate into the loading position.
Unlock and open note cassette. Pull the packer plate back. Cassettes allow the
pusher-plate to be latched in position using the
key-lock.
2. Count the number of bills that remain in the cassette, if any. Next, count the number of bills that are
being added into the cassette.
3. Add the number of bills being placed into the cassette to the number that remained. The “Total”
number of these bills will be entered in the “E
NTER C ASSETTE Q UANTITY ” option. Place the currency into
the cassette between the pusher plate and front of cassette.
4. Hold the notes shown and turn the key-lock to release the catch. Allow the pusher plate to slowly
compress the notes.