Spectra Precision Survey Pro CE v3.80 Ranger GPS Reference Manual - Manual (Page 85)

Stakeout Menu
85
Show Station and Offset
6WDNHRXW 6KRZ 6WDWLRQ
The Show Station and Offset routine allows you to position the rover
anywhere near a polyline, a range of points that define a line, or an
alignment to see where the rod is located in relation to the selected
line.
The first screen of this routine is similar to the conventional method,
except that the
%DFNVLJKW button is replaced with a 6HWXS +5 button
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See the conventional
Reference Manual for details.
Show Station – Screen Two
Once the line is selected, the second screen is opened where
information is displayed about the rod position and the selected line.
GPS Status : displays the current solution
type, the number of satellites used, and the
horizontal and vertical precision computed by
the receiver. Tap on this button to open the
detailed GPS Status screens (Page R-20).
5 Hz Mode : switches the receiver from one Hz
to five Hz mode. When this box is checked,
the receiver will compute positions five times
a second so the display will update in near
real time while you are roving to the point.
2&&83<,1* / 529,1* : switches from
ROVING to OCCUPYING mode. When ROVING, the receiver is in
dynamic mode and will calculate your position as you move to the
point. When
OCCUPYING, the receiver is switched to static mode
(depending on settings) and will calculate the most precise position
for the staked point.