Spectra Precision Survey Pro CE v3.80 Ranger GPS Reference Manual - Manual (Page 39)

Survey Menu – RTK
39
6ROYH /RFDOL]DWLRQ« : opens the Solve Localization screen, where the
control points can be selected and the horizontal and vertical
localization are solved.
Note: The Solve Localization screen will do any combination of
horizontal and vertical solution when launched from either the
horizontal or vertical card. Using the Solve Localization screen to
calculate a mapping plane zone localization is very similar to
computing a
Ground- TDS Localization solution. See the section on
Solving Localization for a description of this function (page 48).
Horizontal Mapping Plane Setup
6XUYH\ 3URMHFWLRQ +RUL]RQWDO 6HOHFW =RQH«
Data Base : is where you select which records to
choose. You can:
•
View Zones , which will display controls to
pick a map projection from the zone groups
and zones in the database.
•
View Sites, which will display the entire
zone based sites in the database.
Zone Group : is where you select the zone group
of the map projection zone.
Zone : Is where you select the specific map
projection zone.
Datum : is where you view or select the horizontal datum for this zone.
Note: Some zones in the database may not have a default datum
attached. In this case, the datum control is a list box and you must
select from the data base datums before you can set the zone.
Geoid : displays the geoid model attached to this zone.
.H\ ,Q 3DUDPHWHUV ! opens the Projection Key In Setup screen where
you can create a custom map projection zone, ellipsoid and datum.