Spectra Precision Survey Pro CE v3.80 Ranger GPS Reference Manual - Manual (Page 59)

Survey Menu – RTK
59
Remote Elevation
6XUYH\ 5HPRWH (OHYDWLRQ
The Remote Elevation screen is used to compute and store a new base
point elevation and vertical site by occupying a known vertical
benchmark at the rover.
Note: The Remote Elevation screen is only available when a geoid
model is used for the vertical projection and the base and rover are
set.
Base Point : displays the current base point
number and elevation details.
Info : displays detailed information about the
base point.
Add Benchmark Elevation : When checked, a
new point will be created in the job file with
the entered elevation. If the horizontal
projection is solved, we will calculate (N,E)
from the (lat,lng). If the horizontal projection is
not solved, we will store the new point at (0,0).
In both cases, the elevation of the new point
will be that entered in the Elevation field.
Elevation : When Add Benchmark Elevation is checked, this is the
elevation of the new point.
Select Point / New Point : is the existing or new benchmark point
name that you will be occupying depending on if the Add Benchmark
box is checked or unchecked, respectively.
Rover : is where you enter the measured height of the rover antenna.
6HWXS +5 : opens the Rover Receiver Antenna screen, which is
identical to the Base Receiver Antenna screen discussed on Page R-27
where the details of the rover antenna are defined.