SHARKOON SATA QP Pro LAN (Giga) - Manual (Page 16)

www.sharkoon.de
sata qUICKpORt pRO lan
He now decides whether he agrees “OK” or not “Cancel”:
As soon as the device is unlocked the requester will receive the following info and now can mount the device by clicking
the “Connect device” button.
8. important notes
1. You need to install the server software on every PC, from which you want to access the SATA QuickPort Pro LAN.
2. Your operating system will treat the connected USB device as if it is directly connected to the PC. This means that potential
drivers (e.g. printer drivers) need to be installed on the system (for further details refer to the manuals of the according
devices).
3. As the devices will be handled like directly attached hardware, we suggest to remove memory devices (HDDs, USB sticks
etc.) using the “Safely remove hardware” function before terminating the connection via “Disconnect”.
The server software will also prompt you with the following note:
Other USB devices such as printers, scanners etc. do not require this step and can directly be disconnected.
4. The USB to IP translation may cause a decrease in transfer speed compared to the native operation of the USB devices and
is caused by technical means.