SHARKOON SATA QP Pro LAN (Giga) - Manual (Page 10)

www.sharkoon.de
sata qUICKpORt pRO lan
5.3 uSB server context menu
A – Invokes the server’s configuration window:
a – Define the USB server’s name
b – DHCP on (manual IP address off) / DHCP off (manual IP address on)
c – Decide which USB port(s) shall automatically be mounted at program start
d – “Set“ saves your settings “Cancel“ discards them
e – The entries “Backup Firmware“, “Firmware update“, “Change password“ and “Server restart“ (see below)
B – Calls up the web interface (below 6.)
5.3.1 Backup firmware
The USB server offers the possibility to backup the firmware. The pop-up window (see below) already offers a target path
for the backup file. Via “Browse” you can change this default path. “Submit” starts the backup, “Cancel” will terminate the
action. In this input window (see below) you may assign a new password. This password is required to configure different
settings of the USB server.
5.3.2 Firmware update
In case you have a more actual version of the USB server’s firmware available you may update the current firmware version
via this entry. With “Browse” you select the locally saved update version. “Submit” starts, “Cancel” terminates the update
procedure. A current firmware version can be found at www.sharkoon.com.
A
B
b
a
c
d
e